Description
Specifically engineered for Aluminum-alloy Pallet Lift Tables and a wide range of logistics equipment, this power pack serves as the core hydraulic pump for lift table systems. It integrates powerful performance with precision control, making it the ideal drive solution for electric lift tables, scissor tables, and pallet stacking devices.
Key Technical Specifications:
- Powerful Output: Equipped with a 220V/AC/1.5KW high-performance motor for stable and reliable operation.
- High-Pressure System: Operates at a system pressure of up to 2900 PSI, easily handling heavy-duty lifting requirements.
- Precision Flow Control: Features a flow rate of 0.77 GPM, ensuring smooth and consistent lifting and lowering movements.
- Robust Construction: Built with a 0.39 Gallon (1.5L) steel reservoir for superior heat dissipation and impact resistance.
- Standardized Ports: Supports G1/4 or M14 x 1.5 port sizes, offering excellent compatibility and easy installation.
Drawing
Standard hydraulic circuit diagram shown below. We provide professional customization for oil port threads, manifold blocks, and mounting brackets to meet your specific engineering requirements.
Precautions
- Over 80% of hydraulic system failures are caused by hydraulic oil issues, so correct oil use is essential for the reliability of a hydraulic pump for lift table. The oil viscosity should be 22–46mm²/s according to ISO3448 classification. Before use, hydraulic oil must be filtered through a 10–30μm filter. N46 hydraulic oil is recommended.
- Clean all hydraulic components before installing the system. After the initial operation of the mini hydraulic power pack, check the oil level in the tank to ensure proper performance of the hydraulic pump for lift table.
- Oil should be changed after the first 100 operating hours, and then every 3000 hours. We can provide power units with customized power, flow, pressure, and tank capacity based on requirements.
- The electric hydraulic pump is designed for S3 duty, meaning intermittent operation (1 minute on, 9 minutes off), and should be installed horizontally.
- To maintain thermal balance of the motor, the ratio between operation time and interval time of the mini hydraulic power pack must be 1:9.
| Model |
motor Volt |
motor Power |
Rated Speed |
Displacement |
System Pressure |
Tank Capacity |
| Hpp-56F2.18A2203H |
220VAC |
1.5KW |
1400RPM |
2.1mL/r |
20MPa |
8L |
Need technical details or pricing? Please Contact Us for an immediate response and expert guidance on your project.
